Hand-held optical power meter, red-light integrated machine series products are mainly used for continuous optical signal power measurement, optical fiber link loss testing, and optical fiber line on-off testing. It is controlled by a single chip microprocessor with complete functions. Widely used in optical cable construction and maintenance, optical fiber communication, optical cable sensing, optical CATV, and other fields.
Calibration Wavelength: 850/980/1300/1310/1490/-
Power Range: -50dBM ~+26Dbm
Light Source: 10mW (10KM)
Network Tester: RJ45 Test mode
LED: Point LED lamp
Power Supply: AAA 1.5V (2 Battery)
Connector: Universal FC/SC/ST
Automatic Shutdown Time: 10 min
Continuous Working Time: 72h (OPM Function)
Size: 112mm L+66mm W+28mm H
Keep the end face of the sensor clean, grease-free, pollution-free, do not use unclean and non-standard adapter connectors, do not insert a poor polished end face, otherwise, it will damage and make the test error.
Stick to using an adapter whenever possible.
Once the optical power meter is not in use, cover the dust cap immediately to protect the end surface from cleaning, and prevent dust from attaching to the air for a long time to cause measurement errors.
Carefully plug and pull the optical adapter connector to avoid scratches on the port. 5. Clean sensor surface regularly. When cleaning the sensor surface, please use a special cleaning cotton swab to wipe gently in the circumference direction. the end face of the sensor
What's in the box